The publication is licensed under a Creative Commons Attribution 4.0 International License (CC BY)
Copyright © 2018 All Rights Reserved: UR Publishers
Unique Research Publishers,
Flat NO 301 Sumanth Sai Emrald,
Srinivasa Nagar Colony, Nizampet,
Bachupally,Medchal (Malkajgiri),
Hyderabad, Telangana-500090, India
Web: www.ijcrset.com
Email: editor@ijcrset.com   |   ijcrset.editor@gmail.com

ISSN (online) : 2581-4311

Volume 1 | Special Issue 1 | March 2018
Advanced Materials Characterization Techniques (AMCT 2017), Malaysia  
1.
Sol Gel Synthesis and Preparation of Macroporous Glass: Effect of Sodium Nitrate Addition
Siti Rohani ZAINUDIN, Syed Nuzul Fadzli SYED ADAM, Johar BANJURAIZAH and Firuz ZAINUDDIN
Int J Cur Res Eng Sci Tech, 1 (S1):01-07 |  DOI:10.30967/ijcrset.1.S1.2018.1-7
2.
The Formulation Parameter Influence on PHB Hollow Colloidosomes Formation Prepared via Two Step Solvent Evaporation Method
Ahmad SyakirISMAIL, Salmiah ABDULLAH and Nur Nabilah SHAHIDAN
Int J Cur Res Eng Sci Tech, 1 (S1):08-12 | DOI: 10.30967/ijcrset.1.S1.2018.8-12
3.
Effects of Anthocyanin Pigment from Purple Cabbage in Food Packaging
Suzihaque MAQSOOD-UL-HAQUE, Ummi Kalthum IBRAHIM and Nor Hafiza Izzati WAHAB
Int J Cur Res Eng Sci Tech, 1 (S1):13-18 | DOI: 10.30967/ijcrset.1.S1.2018.13-18
4.
Effect of Leaching Agent Composition on Morphology, Thermal and Mechanical Properties of Bioglass® Reinforced Polyurethane Scaffold
Intan Syazana SUHAIMIN, Syazana Ahmad ZUBIR and Tuti Katrina ABDULLAH
Int J Cur Res Eng Sci Tech, 1 (S1):19-27 | DOI: 10.30967/ijcrset.1.S1.2018.19-27
5.
Studies on Alkaline Pretreatment of Sugarcane Bagasse and Rice Straw Hydrolysis for the Recovery of Reducing Sugar
Jia Yi CHIN, Siti Kartini ENCHE AB RAHIM and Norazharuddin Shah ABDULLAH
Int J Cur Res Eng Sci Tech, 1 (S1):28-34 |  DOI: 10.30967/ijcrset.1.S1.2018.28-34
6.
The Effect of Different Urea Composition on Production of Porous Stainless Steel type 316L through Powder Metallurgy Technique
Zulaikha ABDULLAH, Sufizar AHMAD, Murni Faridah M. RAFTER, Azmahani SADIKIN, Mohd Nasrull ABDOL RAHMAN and Azzura ISMAIL
Int J Cur Res Eng Sci Tech, 1 (S1):35-39 | DOI: 10.30967/ijcrset.1.S1.2018.35-39
7.
Comparison Thermal and Hardness of CaO-MgO-Al2O3-SiO2-B2O5 Glass from Different Sources of Kaolin Minerals as Main Raw Mineral
Johar BANJURAIZAH, Yan Jun TAN and Eing Kuan KOK
Int J Cur Res Eng Sci Tech, 1 (S1):40-44 | DOI: 10.30967/ijcrset.1.S1.2018.40-44
8.
Degradation of Methyl Orange Using N-TiO2 Synthesized via Hydrothermal Treatment
Siti Aida IBRAHIM, Muhammad Alimi JASNI, Ainun Rahmahwati AINUDDIN,Mohamed Nasrul MOHAMED HATTA and Zakiah KAMDI
Int J Cur Res Eng Sci Tech, 1 (S1):45-50 | DOI: 10.30967/ijcrset.1.S1.2018.45-50
9.
Deposition of TiO2 on Macroporous Cordierite Substrate for Wastewater Treatment
Yong Por ONG, Johar BANJURAIZAH, Eing Kuan KOKc and Li Ngee HO
Int J Cur Res Eng Sci Tech, 1 (S1):51-56 | DOI: 10.30967/ijcrset.1.S1.2018.51-56
10.
Effect of Calcination Temperature on Microstructural Evolution of Electrospun ZnO Fibers
Kuan Ying KOK, Nur Ubaidah SAIDIN, Thye Foo CHOO, Boon Siong WEE, Suk Fun CHIN and Yusof ABDULLAH
Int J Cur Res Eng Sci Tech, 1 (S1):57-62 | DOI: 10.30967/ijcrset.1.S1.2018.57-62
11.
Effect of Calcination Temperature on the Silica Ceramic Membrane Synthesized via Sol-gel Dip-coating Method
Farah Diana Mohd Daud, Nor Amyra Zulianey Kahlib and Muhammad Husaini Mohd Rafi, Maizirwan Mel, Ahmad Zahirani Ahmad Azhar, Noor Azlina Hassan, Assayidatul Laila Nor Hairin
Int J Cur Res Eng Sci Tech, 1 (S1):63-67  | DOI: 10.30967/ijcrset.1.S1.2018.63-67
12.
Effect of Calcination Temperature on Titanium Dioxide Synthesized by Sol-Gel Method
Johar BANJURAIZAH,Yong Por ONG and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):68-74 | DOI: 10.30967/ijcrset.1.S1.2018.68-74
13.
Effect of Poling Parameter on Piezoelectric and Dielectric Properties of La and Sr Doped PZT
T.N. Izzah TUAN AB RASHID, Hasmaliza MOHAMAD, Zainal Arifin AHMAD and Julie Juliewatty MOHAMED
Int J Cur Res Eng Sci Tech, 1 (S1):75-81| DOI: 10.30967/ijcrset.1.S1.2018.75-81
14.
Effect of Soaking Time to the Bending Strength of Porcelain with Palm Oil Fuel Ash
Mohamad Zaky NOH, Hassan Usman JAMO, Mohd Al Amin MUHAMAD NOR and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):82-87 | DOI: 10.30967/ijcrset.1.S1.2018.82-87
15.
Effect of UV Irradiation on Apatite Deposition on Anodised TiO2 Coating Formed Under Mixed Acid Solution
S.S.SALEH, M.R. Mohamed YUNUS and H.Z.ABDULLAH
Int J Cur Res Eng Sci Tech, 1 (S1):88-94 | DOI: 10.30967/ijcrset.1.S1.2018.88-94
16.
Enhanced Visible Light Response of Phosphorus Incorporated TiO2 Nanotube Arrays Photocatalyst
Khairul Arifah SAHARUDIN and Srimala SREEKANTAN
Int J Cur Res Eng Sci Tech, 1 (S1):95-100| DOI: 10.30967/ijcrset.1.S1.2018.95-100
17.
Enhancement of Double-Exchange Mechanism in Charge-Ordered Pr0.75Na0.25MnO3 Ceramics by Cr Doped at Mn-Site
Rabiatul Adawiyah ZAWAWI, Norazila IBRAHIM and Suhadir SHAMSUDDIN
Int J Cur Res Eng Sci Tech, 1 (S1):101-105 | DOI: 10.30967/ijcrset.1.S1.2018.101-105
18.
Fabrication and Characterization of Anorthite-Based Porcelain using Malaysian Mineral Resources
Hamdan YAHYA, Abdul Rois ABDUL MOIS and Aspaniza AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):106-111 | DOI: 10.30967/ijcrset.1.S1.2018.106-111
19.
Fabrication of Bioactive Glass Powder Based on Sio2-Cao-Na2O-P2O5 System at Lower Melting Temperature
Nurul Farhana IBRAHIM,Hasmaliza MOHAMAD and Siti Noor Fazliah MOHD NOOR
Int J Cur Res Eng Sci Tech, 1 (S1):112-117 | DOI:  10.30967/ijcrset.1.S1.2018.112-117
20.
Improved Densification and Dielectric properties of ZBS-doped CaCu3Ti4O12 Electroceramics
Nur Shafiza Afzan SHARIF, Julie Juliewatty MOHAMED, Mohd Qusyairie SAARI, Mohd Fadzil AIN, Zainal Arifin AHMAD, Mohd Fariz AB RAHMAN
Int J Cur Res Eng Sci Tech, 1 (S1):118-123 | DOI: 10.30967/ijcrset.1.S1.2018.118-123
21.
Influence of Pentavalent Niobium on Microstructural and Mechanical Properties of ZTA Ceramic Composite via Cold Isostatic Pressing
Nurul Khairunnisa SU, Nik Akmar REJAB, Johar BANJURAIZAH, Muhammad Asri IDRIS and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):124-129 | DOI: 10.30967/ijcrset.1.S1.2018.124-129
22.
The Effect of Boron Oxide on Concentration of Iron Ion Released from SiO2-B2O3-Na2CO3-Fe2O3 Glass System
Nurul Fariha YUSOF, Ku Halim KU BULAT, Nur Azam BADARULZAMAN, Mohd Al Amin MUHAMAD NOR
Int J Cur Res Eng Sci Tech, 1 (S1):130-134 | DOI: 10.30967/ijcrset.1.S1.2018.130-134
23.
Microstructure and Hardness of Zirconia Toughened Alumina (ZTA) Ceramics by Hot Isostatic Press Sintering
Nik Akmar REJAB, Abdul Salam AZMAN, Nurul Khairunnisa SU, Banjuraizah JOHAR and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):135-140 | DOI:  10.30967/ijcrset.1.S1.2018.135-140
24.
Microstructure and Strength Enhancement of Portland Composite Concrete using Polyvinyl Alcohol (PVA) and Silica Fume as Replacement Material
Izwan JOHARI, Wan Norsariza WAN HUSIN, Zainal Arifin AHMAD, and Md Azree OTHUMAN MYDIN
Int J Cur Res Eng Sci Tech, 1 (S1):141-146 | DOI: 10.30967/ijcrset.1.S1.2018.141-146
25.
Performance of POFA-Based Alkali-Activated Mortar Exposed to Elevated Temperatures
Babatunde Abiodun SALAMI, Megat Azmi MEGAT JOHARI, Zainal Arifin AHMAD and Mohammed MASLEHUDDIN
Int J Cur Res Eng Sci Tech, 1 (S1):147-153 | DOI: 10.30967/ijcrset.1.S1.2018.147-153
26.
Preliminary study on Preparation and Characterization of Ceramic Membrane for Water and Wastewater Filtration
Asma Syafawati AHMAD SAIBI and Mohd Al Amin MUHAMAD NOR
Int J Cur Res Eng Sci Tech, 1 (S1):154-159 | DOI:  10.30967/ijcrset.1.S1.2018.154-159
27.
Rheological Behaviour and Fired Properties of Malaysia Clay from Mersing(Johor) In Application to Manufacturing of Ceramic Tile
Chee Lung CHIN, Zainal Arifin AHMAD, Sew Seng SOW
Int J Cur Res Eng Sci Tech, 1 (S1):160-165 | DOI: 10.30967/ijcrset.1.S1.2018.160-165
28.
The Effect of Sintering Temperature of 8YSZ Powder to Densification and Crystal Structure
Tinesha SELVARAJ, Johar BANJURAIZAH and Shing Fhan KHOR
Int J Cur Res Eng Sci Tech, 1 (S1):166-171 | DOI: 10.30967/ijcrset.1.S1.2018.166-171
29.
The Effect of Surfactants on the Stability of TiO2 Aqueous Suspension
Cik Rohaida CHE HAK, Dian Nur Elleina FATANAH, Yusof  ABDULLAH and Meor Yusof MEOR SULAIMAN
Int J Cur Res Eng Sci Tech, 1 (S1):172-178 | DOI: 10.30967/ijcrset.1.S1.2018.172-178
30.
Thermal Assessment of Kpata Fireclay for Refractory Applications
Job AjalaAMKPA and NurAzam BADARULZAMAN
Int J Cur Res Eng Sci Tech, 1 (S1):179-184 | DOI: 10.30967/ijcrset.1.S1.2018.179-184
31.
Dynamic Mechanical and Roughness Analyses of Polypropylene/Kaolin Nanocomposite
Shehu YAHAYA, Suzi Salwah JIKAN, Nur Azam BADARULZAMAN, Rozainita ROSLEY, Darfizzi DERAWI and Ajiya Dahiru ADAMU
Int J Cur Res Eng Sci Tech, 1 (S1):185-190 10.30967/ijcrset.1.S1.2018.185-190
32.
Effect of Banana Peel Fiber as Reinforcement in Low Density Polyethylene/Durian Seed Starch Blends
Norshahida SARIFUDDIN, Mohammad Anuar Zaki SHAARI, Nur' Aishah AHMAD SHAHRIM, Ahmad Zahirani AHMAD AZHAR and Hafizah Hanim MOHD ZAKI
Int J Cur Res Eng Sci Tech, 1 (S1):191-196 | DOI: 10.30967/ijcrset.1.S1.2018.191-196
33.
Effect of Supercritical Carbon Dioxide on Tensile Properties of Durian Skin Fibre Biocomposite
Siti Nur E'zzati MOHD APANDI, Hazleen ANUAR, Siti Munirah Salimah ABD. RASHID, Yose Fachmi BUYS, d and Rashidi OTHMAN
Int J Cur Res Eng Sci Tech, 1 (S1):197-202  | DOI: 10.30967/ijcrset.1.S1.2018.197-202
34.
Microstructure and Physical Characterization of Mahang (Macaranga) Wood as a Core Material in Sandwich Composites
Noor Sharina Azrin ZAKARI, Julie Juliewatty MOHAMED Nurul Basyirah Aryani ABDUL RAHMAN, Aslina Anjang ABDUL RAHMAN, and Zairul Amin RABIDIN
Int J Cur Res Eng Sci Tech, 1 (S1):203-208  | DOI: 10.30967/ijcrset.1.S1.2018.203-208
35.
Tensile Properties of g Irradiated And Non-Irradiated Poly (L-Lactide) Carboxymethyl Starch And Nano-Hydroxyapatite Composite Film
Mohd Reusmaazran bin YUSOF, Roslinda SHAMSUDIN, Yusof ABDULLAH,c and Norzita YAACOB
Int J Cur Res Eng Sci Tech, 1 (S1):209-214  | DOI: 10.30967/ijcrset.1.S1.2018.209-214
36.
AC Susceptibility of the Magnesium Diboride (MgB2) Added on Bi1.6Pb0.4Sr2Ca2Cu3O? Superconductor
A. ARLINA, A.H. SHAARI, M.M.A. KECHIK, F. AULI, N.A. KAMAL and N. AMERAM
Int J Cur Res Eng Sci Tech, 1 (S1):215-219 | DOI: 10.30967/ijcrset.1.S1.2018.215-219
37.
Crystalline Phase, Surface Morphology and Electrical Properties of Monovalent Doped Pr0.75Na0.25Mn1-yCoyO3 Ceramics
Nurhabibah Nabilah AB MANNAN, Suhadir SHAMSUDDIN,  Mohamad Zaky NOH and Zakiah MOHAMED
Int J Cur Res Eng Sci Tech, 1 (S1):220-225 | DOI: 10.30967/ijcrset.1.S1.2018.220-225
38.
Depositionof TiO2/ZnO Thin Films using Spin-Coating Method
Rosniza HUSSIN, HasrulYAHYA and Nur Syahraain ZULKIFLEE
Int J Cur Res Eng Sci Tech, 1 (S1):226-232 | DOI: 10.30967/ijcrset.1.S1.2018.226-232
39.
Effect of Borosilicate Glass Addition on the Dielectric Properties of CCTO-Glass Composites for DRA Applications
Mohd Fariz AB RAHMAN, Julie Juliewatty MOHAMED, Mohd Fadzil AIN and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):233-238 | DOI: 10.30967/ijcrset.1.S1.2018.233-238
40.
Effect of CuO doped TiO2 on Morphology, Crystal Structure and Photocatalytic Activity
Siti Khalijah KAMARUDIN,Nur Farhana M. YUNOS,Banjuraizah JOHAR, Suhaimi ILLIAS and Muhammad Asri IDRIS
Int J Cur Res Eng Sci Tech, 1 (S1):239-244 | DOI:10.30967/ijcrset.1.S1.2018.239-244
41.
Humidity Sensing Properties of CCTO Thin Films Grown by Radio Frequency Magnetron Sputtering:Substrates Dependent
Mohsen AHMADIPOUR, Mohd Fadzi lAIN and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):245-250 | DOI: 10.30967/ijcrset.1.S1.2018.245-250
42.
Impact of High Electron Radiation on Electrical properties of 4H-Silicon Carbide Schottky Diodes
Yusof ABDULLAH, Nurul Fadzlin HASBULLAH, Sabuhi GANIYEV, Norasmahan MURIDAN and Cik Rohaida CHE HAK
Int J Cur Res Eng Sci Tech, 1 (S1):251-255 | DOI: 10.30967/ijcrset.1.S1.2018.251-255
43.
Improved Performance of Dye Sensitized Solar Cell with Nb-Doped TiO2 Photoanodes using Solid State Method
Hidayani JAAFAR, Zainal Arifin AHMAD and Mohd Fadzil AIN
Int J Cur Res Eng Sci Tech, 1 (S1):256-261 | DOI: 10.30967/ijcrset.1.S1.2018.256-261
44.
Optical Characteristics of ITO/NTCDA Film for Defence Technology Application
Nursaadah Ahmad POAD, Siti Zulaikha Ngah DEMON, Muhd Zuazhan YAHYA and Noriah BIDIN
Int J Cur Res Eng Sci Tech, 1 (S1):262-268 | DOI: 10.30967/ijcrset.1.S1.2018.262-268
45.
222Rn Concentration of Soils at Selected Locations in Universiti Sains Malaysia Health Campus
Asmat ZAHARIMAN, Mohd Ibrohim ABDULLAH, Mohammad Khairul Azhar ABDUL RAZAB, Nur Hartini MOHD TAIB, Nik Kamarullah YA ALI and Wan Ahmad Kamil WAN ABDULLAH
Int J Cur Res Eng Sci Tech, 1 (S1):269-273 | DOI: 10.30967/ijcrset.1.S1.2018.269-273
46.
Dynamic Testing for Compatibility Assessment of Non-Metal Automotive Components with Biodiesel Fuel: A Concept Study
Narisa SA'AT, Ariffin SAMSURI, Hanizam SULAIMAN and Khaidzir HAMZAH
Int J Cur Res Eng Sci Tech, 1 (S1):274-279 | DOI: 10.30967/ijcrset.1.S1.2018.274-279
47.
Characterisation of Al65Cu20Fe15 Quasicrystal Alloy Synthesised via In-situ Casting under Standard Room Ambient and Argon Enriched Atmosphere
Chee Wayne TAN, Joy Rizki PANGESTU DJUANSJAH, Mohd Hasbullah IDRIS, and Wan Fahmin Faiz WAN ALI
Int J Cur Res Eng Sci Tech, 1 (S1):280-286 | DOI: 10.30967/ijcrset.1.S1.2018.280-286
48.
Characterisation of Encapsulation Citronella Oil with Gelatin-Chitosan
Shamsul Baharin MOHAMAD, Junaidah JAII and Norliza IBRAHIM
Int J Cur Res Eng Sci Tech, 1 (S1):287-292 | DOI:  10.30967/ijcrset.1.S1.2018.287-292
49.
Characterization of Activated Carbon Produced from Leucaena leucocephala Biomass as Heavy Metal Adsorbent: Adsorption of Cadmium from Aqueous Solution
Wan Muhammad Hilmi WAN IBRAHIM, Mohd Hazim MOHAMAD AMINI, Nurul Syuhada SULAIMAN, Mohd Sukhairi MAT RASAT, WAN RASHIDAH A. KADIR, Mohamad NAJMI MASRI, Mazlan MOHAMED, Muhammad Azwadi SULAIMAN, Rozyanty RAHMAN and Mohamad Bashree ABU BAKAR
Int J Cur Res Eng Sci Tech, 1 (S1):293-299 | DOI: 10.30967/ijcrset.1.S1.2018.293-299
50.
Comparison of HPOM and TiO2 as Photocatalyst for Degradation of Methylene Blue in Aqueous Solution
Kausar AHMAD FUAD and Siti Kartini ENCHE AB RAHIM
Int J Cur Res Eng Sci Tech, 1 (S1):300-306 | DOI: 10.30967/ijcrset.1.S1.2018.300-306
51.
Comparison Study of Magnesium Anodizing by using Alternating Current (AC) and Direct Current (DC)
Amerul Azree JAMIL, Nazree DERMAN and Suhaily AZMI
Int J Cur Res Eng Sci Tech, 1 (S1):307-312 | DOI: 10.30967/ijcrset.1.S1.2018.307-312
52.
Compression Behaviour of Pseudowollastonite-Mullite Biocomposite
Farah Atiqah ABDUL AZAM, Roslinda SHAMSUDIN, Min Hwei Ng, Zalita ZAINUDDIN, Muhammad Azmi ABDUL HAMID,e and Rashita ABD RASHID
Int J Cur Res Eng Sci Tech, 1 (S1):313-318 | DOI: 10.30967/ijcrset.1.S1.2018.307-312
53.
Effect of Acidic and Alkaline Treatments to Methylene Blue Adsorption from Aqueous Solution by Coconut Shell Activated Carbon
Nor Hakimin ABDULLAH, Izzaty INU, Mohammad Khairul Azhar ABDUL RAZAB, An'amt MOHAMED NOOR, Nurul Akmar CHE ZAUDIN, Mohd Sukhairi MAT RASAT, Mohamad Faiz MOHD AMIN, Wan Nazwanie WAN ABDULLAH, Nurasmat MOHD SHUKRI and Ahmad Zamani AB HALIM
Int J Cur Res Eng Sci Tech, 1 (S1):319-324 | DOI: 10.30967/ijcrset.1.S1.2018.313-318
54.
Effect of Molarity of HCl on Production of Silica (SiO2) From Palm Oil Fuel Ash (POFA)
Sani Garba DURUMIN IYA, Mohamad Zaky NOH, Siti Noraiza AB RAZAK and Nur Azureen ALWI KUTTY
Int J Cur Res Eng Sci Tech, 1 (S1):325-329 | DOI: 10.30967/ijcrset.1.S1.2018.319-324
55.
Effect of Solid Loading on Fabrication of Porous Cordierite
Ahmad Kamil FAKHRUDDIN and Hasmaliza MOHAMAD
Int J Cur Res Eng Sci Tech, 1 (S1):330-335 | DOI: 10.30967/ijcrset.1.S1.2018.325-329
56.
Effect of Urea Formaldehyde to the Mechanical Properties of Particleboard fromNeolamarckiaCadamba and Endospermum Diadenum
SadamKAHAR, Mohamad Najmi MASRI, MazlanMOHAMED and Hashim W SAMSI
Int J Cur Res Eng Sci Tech, 1 (S1):336-341 | DOI: 10.30967/ijcrset.1.S1.2018.336-341
57.
Elucidation of Morphological Behavior on the Samarium Strontium Cobaltite Carbonate Composite Cathode for LTSOFC
Siti Fairus MOHAMMAD, Sufizar AHMAD, Hamimah ABDUL RAHMAN and Andanastuti MUCHTAR
Int J Cur Res Eng Sci Tech, 1 (S1):342-347 | DOI: 10.30967/ijcrset.1.S1.2018.342-347
58.
Enhancement of K0.5Na0.5NbO3 (KNN) Properties through Optimization of Pressure Applied during Sintering Process via HIP Methods
Nor Fatin Khairah BAHANURDDIN, Julie Juliewatty MOHAMED and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):348-353 | DOI: 10.30967/ijcrset.1.S1.2018.348-353
59.
Failure Analysis on Stud Bolts of Chock Valve
Rajaselan WARDAN, Shaiful Rizam SHAMSUDIN, Mohd Fitri MOHAMAD WAHID, Syazwan SANUSI and Amerul Azree JAMIL
Int J Cur Res Eng Sci Tech, 1 (S1):354-360 | DOI: 10.30967/ijcrset.1.S1.2018.354-360
60.
Fourier Transform Infrared Spectroscopy of Porous Zinc with Different Concentration of Potassium Hydroxidein Agar Binder
Siti Nur Athirah MUHAMMAD ZAMRI and Mohamad Najmi MASRI
Int J Cur Res Eng Sci Tech, 1 (S1):361-366 | DOI: 10.30967/ijcrset.1.S1.2018.361-366
61.
Influence of Different Compositions of Fly Ash as Fluxing Agent in Porcelain
Nur Azureen ALWI KUTTY, Mohamad Zaky NOH, Mohd Zul Hilmi MAYZAN and Sani Garba DURUMIN IYA
Int J Cur Res Eng Sci Tech, 1 (S1):367-372 | DOI: 10.30967/ijcrset.1.S1.2018.367-372
62.
Influence of Slurry Rheology Behaviour for Fabricating Reticulated Macroporous Cordierite
Kok EING-KUAN, Johar BANJURAIZAH, Li-Ngee HO and Zabar YAHIDAH
Int J Cur Res Eng Sci Tech, 1 (S1):373-377 | DOI: 10.30967/ijcrset.1.S1.2018.373-377
63.
Influence of Water Molar Ratio on Fabrication of Silica Ceramic Membranes via Sol-Gel Dip-Coating Method
Nor Amyra Zulianey KAHLIB, Wan Amirah WAN MAZLAN, Farah Diana MOHD DAUD , Maizirwan MEL, Ahmad Zahirani AHMAD AZHAR, NoorAzlina HASSAN and Assayidatul Laila NOR HAIRIN
Int J Cur Res Eng Sci Tech, 1 (S1):378-383 | DOI: 10.30967/ijcrset.1.S1.2018.378-383
64.
Measurement of Pipe Strain Using an Ultrasonic System
Sallehuddin IBRAHIM, Nursyahiran ZAHIDIN, Mohd Amri MD YUNUS and Johari KASIM
Int J Cur Res Eng Sci Tech, 1 (S1):384-389 | DOI: 10.30967/ijcrset.1.S1.2018.384-389
65.
Mechanical Properties of Mahang (Macaranga) Wood as a Core Material in Sandwich Composites
Noor Sharina Azrin ZAKARI, Julie Juliewatty MOHAMED, Nurul Basyirah Aryani ABDUL RAHMAN, Aslina Anjang ABDUL RAHMAN and Zairul Amin RABIDIN
Int J Cur Res Eng Sci Tech, 1 (S1):390-395 | DOI:10.30967/ijcrset.1.S1.2018.390-395
66.
Morphological Analysis of Silica-Nickel Oxide Foam Fabricated by Replication Method
Syazwani BAHAROM, Sufizar AHMAD and Hariati TAIB
Int J Cur Res Eng Sci Tech, 1 (S1):396-402 | DOI: 10.30967/ijcrset.1.S1.2018.396-402
67.
Morphological and Thermal Analysis of Retted Rattan Waste Fibers
Zuraida AHMAD, Insyirah YAHAYA and Maisarah TAJUDDIN
Int J Cur Res Eng Sci Tech, 1 (S1):403-409 | DOI: 10.30967/ijcrset.1.S1.2018.403-409
68.
Physical Properties of Edible Films Based on Tapioca Starch as Affected by the Glycerol Concentration
Dahiru Adamu AJIYA, Suzi Salwah Binti JIKAN, B.A. TALIP, H. M. MATIAS-PERALTA,  N.A. BADARULZAMAN and S. YAHYA
Int J Cur Res Eng Sci Tech, 1 (S1):410-415 | DOI: 10.30967/ijcrset.1.S1.2018.410-415
69.
Preparation and Characterization of Activated Carbon from Cocos nucifera L. (coconut) Shell and Sugarcane Bagasse
Muhammad Zharif JASNI, Nor Hakimin ABDULLAH, Suhaiza ABDULLAH, Mohammad Khairul Azhar ABDUL RAZAB, An'amt MOHAMED NOOR, Mazlan MOHAMED, Nik Alnur Auli NIK YUSUF, Mohamad Asyraf MOHD AMIN, Mohd Sukhairi MAT RASAT and Mohamad Faiz MOHD AMIN
Int J Cur Res Eng Sci Tech, 1 (S1):416-421 | DOI: 10.30967/ijcrset.1.S1.2018.416-421
70.
Structural and Thermal Properties of Extracted Cellulose Treated with 1-Butyl-3-Methylimidazolium Chloride
Noor Sahirah MUHAZELI and Asanah RADHI
Int J Cur Res Eng Sci Tech, 1 (S1):422-428 | DOI: 10.30967/ijcrset.1.S1.2018.422-428
71.
Structural Defect(s) in CaCu3+xTi4O12+? Solid Solution Estimated via Reitveld Refinement Method
Mohamad Johari ABU, Mohd Fadzil AIN, Julie Juliewatty MOHAMED and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):429-434 | DOI: 10.30967/ijcrset.1.S1.2018.429-434
72.
Structural Evolution of YIG during Microwave and Conventional Sintering at 1000 ºC
Wan Fahmin Faiz WAN ALI, Maslinda KAMARUDIN Izman SUDIN, Nik Akmar REJAB, Mohd Fadzil AIN, Norazharuddin Shah ABDULLAH and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):435-440 | DOI: 10.30967/ijcrset.1.S1.2018.435-440
73.
Synergism Effects of Coating and Concrete Plaster to Reduce 222Rn Emanations from Red Brick
Mohammad Khairul Azhar ABDUL RAZAB, Asmat ZAHARIMAN, Mohd Ibrohim ABDULLAH, Khairul Anuar ABU BAKAR, Che Amir Haikal CHE ZAHARUDIN, Nik Alnur Auli NIK YUSOFF, Nor Hakimin ABDULLAH, An'amt MOHAMED NOOR, Zulhisyam ABDUL KARI @ ABDULLAH, Mohd Hafiz JAMALUDIN and Noraina ADAM
Int J Cur Res Eng Sci Tech, 1 (S1):441-446 | DOI: 10.30967/ijcrset.1.S1.2018.441-446
74.
Thermal Stability of Plasticized Durian Skin Fibre Biocomposite
Siti Munirah Salimah ABD RASHID, Hazleen ANUAR, Noor Azlina HASSAN, Siti Nur E'zzati MOHD APANDI, Fathilah ALI and Mohd Romainor MANSHOR
Int J Cur Res Eng Sci Tech, 1 (S1):447-451 | DOI: 10.30967/ijcrset.1.S1.2018.447-451
75.
The Relationship of Cutting Chip Type, Length and Thickness to Wear of Zirconia Toughened Alumina Added with Magnesium Oxide (ZTA-MgO) Cutting Tool
Afifah MOHD ALI, Nurul Nabihah JANAL, Nor Ezzati HAMIDON, Ahmad Zahirani AHMAD AZHAR, Suhaily MOKHTAR, Rubina BAHAR and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):452-457 | DOI: 10.30967/ijcrset.1.S1.2018.452-457
76.
Enhancement of Singgora Roof Tile Using Chemical Modification Method
Che Susmaliza CHE KAMARUDIN, Mohamad Najmi MASRI, Mohamad Bashree ABU BAKAR, Mohd Hazim MOHAMAD AMINI, Julie Juliewatty MOHAMED and Muhammad Azwadi SULAIMAN
Int J Cur Res Eng Sci Tech, 1 (S1):458-463 | DOI: 10.30967/ijcrset.1.S1.2018.458-463
77.
Comparison Studies on Phase Formation and Transformation Behavior between Ni-Ti and Ni-TiH2 Synthesized via Solid State Sintering
Hafizah Hanim Mohd ZAKI, Mohamad Hanis Mohamad SHOLIHIN, Jamaluddin ABDULLAH and Norshahida SARIFUDDIN
Int J Cur Res Eng Sci Tech, 1 (S1):464-470 | DOI: 10.30967/ijcrset.1.S1.2018.464-470
78.
Effect of Alloying Element on Microstructure and Mechanical Properties of Sn-0.7cu Solder
A.B. NABIHAH, K.L. JUN and M.S.NURULAKMAL
Int J Cur Res Eng Sci Tech, 1 (S1):471-476 | DOI: 10.30967/ijcrset.1.S1.2018.471-476
79.
Effect of pH in Production of Cu-Sn-Zn via Electroplating Using Less Hazardous Electrolyte
Rozainita ROSLEY, Suzi Salwah JIKAN, Nur Azam BADARUZAMAN, Misbahul Muneer Abd RAHMAN and Hazel Monica MATIAS-PERALTA
Int J Cur Res Eng Sci Tech, 1 (S1):477-481 | DOI: 10.30967/ijcrset.1.S1.2018.477-481
80.
Volumetric Study of Zinc in Various Concentration of Potassium Hydroxide
W.M.I.W. ISMAIL, M.A. SULAIMAN, M.B. ABU BAKAR, M.H.M. AMINI and M.N. MASRI
Int J Cur Res Eng Sci Tech, 1 (S1):482-486 | DOI: 10.30967/ijcrset.1.S1.2018.482-486
81.
Experimental Method on Solder Joint of Ball Grid Array Using Reflow Oven
Mazlan MOHAMED, Mohd Sharizal Abd.AZIZ, M.Z. ABDULLAH, Ayub Ahmed JANVEKAR, Mohammad Khairul Azhar Abdul RAZAB and C.Y KHOR
Int J Cur Res Eng Sci Tech, 1 (S1):487-492 | DOI: 10.30967/ijcrset.1.S1.2018.487-492
82.
Physiochemical Characterization of Sn-Zn Coatings Electrodeposited from an Acidic Chloride Bath in the Absence of Complexing Agent
Assayidatul Laila NOR HAIRIN, RaihanOTHMAN,FaireezREZAL and Farah Diana MOHD DAUD
Int J Cur Res Eng Sci Tech, 1 (S1):493-498 | DOI: 10.30967/ijcrset.1.S1.2018.493-498
83.
Potentiostatic Polarization of Immersed Austenitic Stainless Steel in 3.5 wt.% NaCl at Potential Zero Charge (EPZC)
Muhamad Syazwan SANUSI, Shaiful Rizam SHAMSUDIN, Azmi RAHMAT and Rajaselan WARDAN
Int J Cur Res Eng Sci Tech, 1 (S1):499-504 | DOI: 10.30967/ijcrset.1.S1.2018.499-504
84.
Cryorolling of Al 5083 Alloy: Microstructure and Mechanical Properties at Various Post Annealing Temperatures
S.M. Noraini SAYED AHMAD, Hussain ZUHAILAWATI and Abu Seman ANASYIDA
Int J Cur Res Eng Sci Tech, 1 (S1):505-509 | DOI: 10.30967/ijcrset.1.S1.2018.505-509
85.
The Effect of Milling Time on Properties of Magnesium-Based Composite Fabricated via Powder Metallurgy
Siti Nur Hazwani MOHAMAD RODZI and Zuhailawati HUSSAIN
Int J Cur Res Eng Sci Tech, 1 (S1):510-515 | DOI: 10.30967/ijcrset.1.S1.2018.510-515
86.
The Effect of Reinforcement Amount and Sintering Temperature on Mg Matrix Composite Fabricated by Powder Metallurgy
Nazirah RASHID and Zuhailawati HUSSAIN
Int J Cur Res Eng Sci Tech, 1 (S1):516-521 | DOI: 10.30967/ijcrset.1.S1.2018.516-521
87.
UV Performances and Corrosion Behavior of Nanocoating on Carbon Steel
Norhasnidawani JOHARI, Noor Azlina HASSAN and Norita HASSAN
Int J Cur Res Eng Sci Tech, 1 (S1):522-528 | DOI: 10.30967/ijcrset.1.S1.2018.522-528
88.
Growth Behavior of TiO2 Nanotube Arrays in Different Electrolyte pH
Roshasnorlyza HAZAN, Srimala SREEKANTAN and Ishak MAT
Int J Cur Res Eng Sci Tech, 1 (S1):529-534 | DOI: 10.30967/ijcrset.1.S1.2018.529-534
89.
Morphological, Structural  and Radon Concentration Properties of Two-Dimensional Titanium Carbide MXene, Ti3C2
Zarrul Azwan MOHD RASID, Mohammad Arshad ABDUL A'ZIZ, Mohd Firdaus OMAR, Muhammad Firdaus MOHD NAZERI and Syahrul Affandi SAIDI
Int J Cur Res Eng Sci Tech, 1 (S1):535-539 | DOI: 10.30967/ijcrset.1.S1.2018.535-539
90.
Fabrication and Characterization of Room Temperature Hydrogen Gas Sensor Using ZnO Nanocrystalline Fibers Prepared by Electrospinning
Thye Foo CHOO, Nur Ubaidah SAIDIN, Kuan Ying KOK and Inn Khuan NG
Int J Cur Res Eng Sci Tech, 1 (S1):540-545 | DOI: 10.30967/ijcrset.1.S1.2018.540-545
91.
Characterization of Bio-Polymer Composite Thin Film Based on Banana Peel and Egg Shell
Nik Alnur Auli NIK YUSUF, Mohammad Khairul Azhar ABDUL RAZAB, Nor Hakimin ABDULLAH, An'Amt MOHAMED NOOR, Mahani YUSOFF, Arlina ALI, Nurul'Ain MOHD KAMAL, Nadiah AMERAM, Mohd Nasha'aain NORDIN
Int J Cur Res Eng Sci Tech, 1 (S1):546-550 | DOI: 10.30967/ijcrset.1.S1.2018.546-550
92.
Comparison of Different Types of Dispersing Agent on Zeta Potential and Particle Size Analysis of Sago Starch Dispersion as Bio-filler for Natural Rubber Latex Films
Mohd Fikri AB RAHMAN, En Pei NEO and Azura A. RASHID
Int J Cur Res Eng Sci Tech, 1 (S1):551-555 | DOI: 10.30967/ijcrset.1.S1.2018.551-555
93.
Influence of Epoxidized Palm Oil on Polyhydroxyalkanoates Tensile Properties
A. AIDA, H. NORITA and H.N. AZLINA
Int J Cur Res Eng Sci Tech, 1 (S1):556-559 | DOI: 10.30967/ijcrset.1.S1.2018.556-559
94.
Plasticizer for Liquid Polymeric Membrane of Ion Selective Electrode Based on Thiazole Derivatives as Ionophore
Noor Wahidah ZAINOL JAMIL, Muhd Zu AZHAN YAHYA, Juliana JUMAL and Noor Azilah MOHD KASIM
Int J Cur Res Eng Sci Tech, 1 (S1):560-565 | DOI: 10.30967/ijcrset.1.S1.2018.560-565
95.
Preliminary Development of Laminated Nanocomposite from Nanocellulose-Kevlar for Military Application
Nurulaida TOHA, Wan Mohd Hanif WAN YAA'COB, Nur Amira MAMAT RAZALI, Rusaini Athirah AHMAD RUSDI, Ariffin ISMAIL, Ku Zarina KU AHMAD, and Fauziah ABDUL AZIZ
Int J Cur Res Eng Sci Tech, 1 (S1):566-570 | DOI: 10.30967/ijcrset.1.S1.2018.566-570
96.
Effects of Banana Skin Powder on Properties of Jackfruit Seed Starch/Poly(Vinyl Alcohol) PVA Film
Nur'aishah AHMAD SHAHRIM, Nur Najihah Solehah ABD RANI, Norshahida SARIFUDDIN, Hafizah Hanim MOHD ZAKI and Ahmad Zahirani AHMAD AZHAR1
Int J Cur Res Eng Sci Tech, 1 (S1):571-577 | DOI: 10.30967/ijcrset.1.S1.2018.571-577
97.
Characterization and Preparation of Polyvinyl Alcohol (PVA) as Inhibitor in Formation of Hydrates
Najihah JAMIL, Hazlina HUSIN, Ahmad Waseem ALFIDA, Zachary AMAN and Zulkafli HASSAN
Int J Cur Res Eng Sci Tech, 1 (S1):578-584 | DOI: 10.30967/ijcrset.1.S1.2018.578-584
98.
Effect of Single Walled Carbon Nanotube Addition to thePhysical Properties of Monolithic Alumina
Ahmad Zahirani Ahmad AZHAR, Nor Amyra Zulianey, Hanisah MANSHOR, Wee Sing YEO, Afifah MOHD ALI, Nik Akmar REJAB and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):585-590 | DOI: 10.30967/ijcrset.1.S1.2018.585-590
99.
Deposition and Characteristics of Sputtered Coated CCTO Thin Layer on Silicon Wafer
Mohsen AHMADIPOUR, Mohd Fadzil AIN and Zainal Arifin AHMAD
Int J Cur Res Eng Sci Tech, 1 (S1):591-595 | DOI: 10.30967/ijcrset.1.S1.2018.591-595
100.
Dielectric Resonator Antenna of Nd-doped BaTiO3 for X-Band Applications
Nik Akmar REJAB, Mohamadariff  OTHMAN, Mohd Fariz AB RAHMAN, Zainal Arifin AHMAD, Mohd Fadzil AIN
Int J Cur Res Eng Sci Tech, 1 (S1):596-602 | DOI: 10.30967/ijcrset.1.S1.2018.596-602